 |
 |
|
|
|
WHATS NEW
At Paddlers Supply, we continue to offer new products to our customers. This page is dedicated to products we are introducing.
 |
Shown at left of Long Pin, for comparison.
SmartTrack Short Rear Mount Housing is suitable for kayaks with a vertical, flat section on the stern of the kayak using a bracket. Teflon coated 6061-T6 extruded alloy is extremely rugged and corrosion proof.
• Mounts on the vertical surface of the stern
• Pin measures 2"
See PDF for installation and drawings |
| Part# ST3916 | Download Product Manual (PDF) |
 |
Shown at left of Long Pin, for comparison.
SmartTrack Short Pin Housing is suitable for kayaks with a rudder pivot hole located on a flat or stepped down area on the rear deck. There is often a larger hole that can accept a nylon bushing for the short pin. Teflon coated 6061-T6 extruded alloy is extremely rugged and corrosion proof.
See PDF for installation and drawings
|
| Part# ST3917 | Download Product Manual (PDF) |
 |
SmartTrack Long Pin Housing is suitable for kayaks with an extension or a vertical hole all the way through the rear of the kayak. Teflon coated 6061-T6 extruded alloy is extremely rugged and corrosion proof.
• Mounts on the vertical surface of the stern
• Pin measures 3 5/8"
See PDF for installation and drawings
|
| Part# ST3915 | Download Product Manual (PDF) |
 |
Shown at left. The SmartTrack Foil rudder blade is revolutionary in the field of rudders. It is extremely compact and highly efficient. Using foil design induces 25% less drag and 32% more turning efficiency than an ordinary flat aluminum blade.
See PDF for performance graphs |
| Part# ST3930 | Download Product Manual (PDF) |
|
Shown at right. The SmartTrack Foil rudder blade is revolutionary in the field of rudders. It is extremely compact and highly efficient. Using foil design induces 25% less drag and 32% more turning efficiency than an ordinary flat aluminum blade.
See PDF for performance graphs |
| Part# ST3931 | Download Product Manual (PDF) |
 |
SmartTrack Vertical Adjustment Kit allows lowered installation of the Toe Pilot Controls for better fit or comfort. It also makes it possible to use the existing holes in your kayak to mount your new SmartTrack system if the existing hole have non-standard spacing.
See PDF for installation instructions |
| Part# ST3948 | Download Product Manual (PDF) |
 |
Ergonomically designed, these foot braces employ super tough aluminum rails for increased rigidity and durability.
The two part Toe Pilots foot braces are fixed to provide solid bracing while the movable toe piece allows rudder operation. Easy adjustment from the cockpit.
See PDF for installation and drawings |
| Part# ST3911 | Download Product Manual (PDF) |
 |
Use the toe half of our pedals to set your course, then use the Trim Tab to lock it in. Designed to fit conveniently in front of the paddler, the Trim Tab offers improved accuracy when setting your course.
See PDF for installation instructions |
| Part# ST3825 | Download Product Manual (PDF) |
 |
Rock solid, ergonomically designed foot braces. These braces have rails made from tough, rigid aluminum. Easily adjusted from inside the cockpit.
Mounting holes are set at the standard 14.5" on center.
See PDF for installation instructions and drawings |
| Part# ST3910 | Download Product Manual (PDF) |
 |
The Full Cut helmet shell drops below the ear for improved protection and helmet stability. A split-mould injection process ensures a highly rigid shell and provides an ergonomic “negative draft” shape that conforms to the natural curves of the head, protecting the forehead and base of the cranium.
Features:
- Ventilation and drainage are provided by the signature Predator Three Ellipse® vent holes.
- Shell is impact Ralvek® thermoplastic for increased stiffness and protection.
- A comfortable closed-cell waterproof foam is used to dissipate impacts.
- Closed-cell fit pad kit for customizing.
- Top quality webbing and buckles
- Stainless steel chinstrap rivets.
EN 1385 Certified
Sizes - One size with fit pads included |
| Part# PH-FC | |
 |
Cool styling with a visor! This low profile helmet has a 2 1/2 ” (6.5 cm) visor that provides total eye and sun protection.
Features:
- Shell is high impact Ralvek® thermoplastic for increased stiffness and protection.
- Comfortable closed-cell waterproof foam is used to dissipate impacts.
- Croc-Loc® rear adjustor for a comfortable, locked-down precision fit.
- closed-cell fit pad kit for customizing.
- Detachable thermoformed ear covers.
- Edging trim, top quality webbing, buckles and stainless steel chinstrap rivets.
EN 1385 Certified
Sizes - One size with fit pads included |
| Part# PH-LEE | |
 |
This full coverage helmet offers maximum protection without compromising style or performance. The split-mould injection process ensures a highly rigid shell and allows us to create an ergonomic “negative draft” shape that conforms to the natural curves of the head, protecting the forehead and base of the cranium
Features:
- Ventilation and drainage by our signature Predator Three Ellipse® vent holes.
- Shell is made of high impact Ralvek® thermoplastic for increased stiffness and protection.
- Comfortable closed-cell waterproof foam is used to dissipate impacts.
- Closed-cell fit pad kit for customizing
- Detachable thermoformed ear covers
- Top quality webbing, buckles and stainless steel chinstrap rivets.
EN 1385 Certified
Sizes - One size with fit pads included |
| Part# PH-SC | |
 |
The Six is the ultimate in lightweight, comfortable, and durable head protection for the most demanding adventures. The Six’s superior impact protection is achieved using a carbon fiber reinforced fiberglass shell and expanded polystyrene impact liner. The clean design lines and snag-free outer surface deliver total protection of all key areas while maintaining excellent visibility and reduced weight; the Six weighs in at only 785 grams (1.75lb!
Features:
- Detachable composite fiber visor with flow-through holes
- Padded chinguard
- Top quality chinstrap webbing
- Contoured chinstrap buckle
- Stainless steel chinstrap rivets and a fit pad kit.
EN 1385 Approval Pending
Sizes - One size with fit pads included
|
| Part# PH-6 | |
 |
The Trinity is a great, all-round helmet that can be worn with the visor front or back. Its modest 1 1/2 ” (4 cm) visor provides eye and sun protection.
Features:
- Croc-Lok® rear adjustor for a comfortable, locked-down precision fit.
- Shell is made of high impact Ralvek® thermoplastic for increased stiffness and protection.
- Comfortable closed-cell waterproof foam is used to dissipate impacts.
- Closed-cell fit pad kit for customizing.
- Detachable thermoformed ear covers.
- Top quality webbing and buckles and stainless steel chinstrap rivets.
EN 1385 Certified
Sizes - One size with fit pads included |
| Part# PH -T | |
 |
The Shiznit can be worn with the visor front or back - nice! When compared to helmets with longer visors, the Shiznit's 1 1/2” (4 cm) visor provides sun protection and improved safety by reducing “bucketing”.
Features:
- High impact Ralvek® thermoplastic for increased stiffness and protection.
- A comfortable closed-cell waterproof foam is used to dissipate impacts.
- Croc-Loc® rear adjustor for a comfortable, locked-down precision fit.
- The Shiznit includes a closed-cell fit pad kit for customizing
- Detachable thermoformed ear covers
- Top quality webbing and buckles and stainless steel chinstrap rivets.
EN 1385 Certified
Sizes - One size with fit pads included |
| Part# PH-SN | |
 |
The extremely versatile Lock-All is the cable lock for nearly everything. Perfect for SOT's and touring kayaks alike, the Lock-All's flexible nature allows the user to lock just about anything that has an opening 3/4" or larger; perfect for the scupper hole on fishing kayaks.
The vinyl coated, galvanized cable is super tough for maximum security while the barrel lock can be set to any 4-digit combination you wish.
Here's a very short video on how it works
See the Video!
|
| Part # LASSO-LA | Download Product Manual (PDF) |
 |
The Brat fits kayak 9 - 12' long.
Danuu has kayaks covered!
Danuu makes covers with a standard of quality that is higher than anyone else and is shown repeatedly to be the best in their class. They are 100% polyester covers are UV/water resistant with double stitched seams and doubled material at all stress points. |
| Part # DU-BRAT | |
 |
The Punk fits kayaks 12 - 15' long
Danuu has kayaks covered!
Danuu makes covers with a standard of quality that is higher than anyone else and is shown repeatedly to be the best in their class. They are 100% polyester covers are UV/water resistant with double stitched seams and doubled material at all stress points. |
| Part # DU-PUNK | |
 |
The Dude fits kayaks 14 - 16' long
Danuu has kayaks covered!
Danuu makes covers with a standard of quality that is higher than anyone else and is shown repeatedly to be the best in their class. They are 100% polyester covers are UV/water resistant with double stitched seams and doubled material at all stress points. |
| Part # DU-DUDE | |
 |
The Buddy fits kayak 15 - 18' long.
Danuu has kayaks covered!
Danuu makes covers with a standard of quality that is higher than anyone else and is shown repeatedly to be the best in their class. They are 100% polyester covers are UV/water resistant with double stitched seams and doubled material at all stress points. |
| Part # DU-BUDDY | |
 |
The Tubby fits Canoes 14 - 16'6" long.
Danuu has kayaks covered!
Danuu makes covers with a standard of quality that is higher than anyone else and is shown repeatedly to be the best in their class. They are 100% polyester covers are UV/water resistant with double stitched seams and doubled material at all stress points. |
| Part # DU-TUBBY | |
 |
The CUSTOM GEL FISHING SEAT combines a genuine SKWOOSH™ Gel Kayak Seat with a padded back support for COMFORTABLE FISHING. With custom features like 3 built-in rod holders, straps to hold jaw and hook pliers and an “O” ring to attach gear, the Custom Gel Fishing Seat provides ultimate comfort and convenience for the serious kayak fisherman.
|
| Part # SK-CG1204 | |
 |
The ECO #9 combines the SKWOOSH™ Kayak Gel Seat with a battened, padded, contoured back support. ECO #9 is 17½"high and has a self-draining zippered pocket for carrying stuff. The ECO #9 is the ultimate in comfort for the cost conscious kayak fisherman or the long duration paddler.
Paddle longer with SKWOOSH™! |
| Part #SK-ECO #9 | |
 |
The finger board creates a comfortable and ergonomic shape to a paddle shaft. Easily installed with included heat shrink tubing. This is a great way to upgrade a less than desirable paddle |
| Part # FNGR-BRD | |
|
|
|
Paddlers Supply - Seattle, WA
Tel: 206-935-4121 Fax: 206-935-4245 |
| VisualWebz.com |